- Add: 721, 7/F, CD Tower, Tianjing Building, Tairan 5th Road, Shatou Street, Futian District, Shenzhen, Guangdong, China
- Tel: 0755-82664119 --82664110--61563066 全国服务热线:400-600-1072
- Fax: 0755-61563066
- Email: info@sztris.com
Micorwave sensor Your position: Home > Micorwave sensor
Microwave sensor TR-D100
- Product description: TR-D100 is an active microwave sensor sensor using the Doppler principle. Sensors emitting high frequency electromagnetic waves (5.8GHz) and receives their echo, this sensor detects echoes changes eve
Product introduction
Technical parameters:
Working voltage: 220~240V
Operating frequency: 50/60Hz
Installation: indoors, ceiling installation
HF systems: 5.8GHz high frequency electromagnetic waves, ISM band
Transmit power: less than 10mW
Detection angle: 360 degrees
Detection range: 1-7m (RADIUS) adjustable
Delay: adjustable 10 seconds to 20 minutes
Light illumination: 2~600LUX
Power consumption: 0.9W
Parameter settings
Dimming range settings. 0% to 50%
After power up, within 10 seconds, can adjust the brightness Sen from 0% ~ 50% set brightness after the people left.
Standby time settings. 1min to 60min (24h)
After power up, within 10 seconds, adjust the brightness of time aftertime set to leave.
Led flashes 1 time 1min 3min led flashing LED flashes 2 times 3 times for5min led flashing 4 times for 10min
Led flashing 5 times for 15min led flashing 6 times 20min 30min ledflashing LED flashes 7 times 8 times for 40min
60min led flashing LED flashes 9 times 10 times for 24 hours. (Permanentlight)
Induction time setting. 10S up to 20 points. (Power setting 10 secondsafter) to adjust time.
Led flashes 1 time 10sec 30sec led flashing LED flashes 2 times 3 timesfor 1 min led flashing 4 times for 2 min
Led flashing 5 times for 5 min led flashes 6 times for 8 min 10min ledflashing LED flashes 7 times 8 times for 12min
15min led flashing LED flashes 9 times 10 times 20min
Distance setting.
Adjusting Sen potentiometer, led blinking at 1 to 10 times. Insubparagraph 2m to 8M about.
Light control functions.
Lux can be set, lights automatically at night, (light time and brightnessof the set value).
300~600LUX close
PREVIOUS：Microwave sensor TR-828
NEXT：LED flood light sensor TR-702
sze2ray
sztris